Bonus: Discussion with Karen Sater
Abstract
Adam and Fred sit down at RAMS with Karen to discuss her work and challenges as a reliability engineer.
What is Reliability Optimization?
Delivering the best reliability performance within the various constraints imposed.
Without constraints such as budget, time to market, customer expectation, product functional capabilities, and product weight, you certainly could design and deliver a highly reliable product.
There always are constraints.
In the Oliver Wendall Holmes poem, The One Hoss Shay, the deacon procures the strongest oak, the supplest leather, and the best of best materials. Cost was not a constraint. And the shay lasted 100 years to the day.
If the technology permits there may be stronger or more durable components available for a price, yet cost is often a limiting factor. [Read more…]
Key Elements for Your Project Specific Reliability Plan
A plan is a guide or roadmap for intended action.
A reliability plan is also a collection of specific tasks and milestones and enhanced with a rationale to allow the entire team fully understand their role accomplishing the reliability objectives.
The plan is a way to achieve the desired business objectives. Meaning the product is reliable enough to meet customer expectations, minimize warranty expenses, and garner market acceptance. The plan is just a plan, it is the accomplishment of the tasks, the decision which improves the design, the signals monitored that stabilize the supply chain and assembly process, that make the difference.
A plan without action is not worth the effort. [Read more…]
SOR RAMS 16-2 Bonus Discussion with Celine Geiger
Deciding What Should Have Fault Tolerance
In some circumstances, it is desirable to ensure the system continues to operate even if there is an internal failure. An aircraft navigation system should be able to operate even if an internal dc-dc regulator fails, for example.
Not everything within some systems benefits by being fault tolerant.
For example, a failure of a cabin reading light over a passenger seat is not critical to the safe operation of the aircraft, thus is likely not created to be fault tolerant. One criterion to determine what should be fault tolerant is the criticality of the function the system provides.
This also applies to specific subsystems within a system allowing some elements to be created fault tolerant and others within the system not. [Read more…]
The Derating & Safety Margin Manual
Do you have one in your organization? Is it used regularly?
If not, your organization’s products are likely not as reliable as they should be. You are shipping products that are not as robust nor reliable as your customers deserve.
Derating and Safety Factors, defined earlier, provide a means to select components or create design features that have sufficient margin to accommodate variation in use and strength over time.
So why are these tools routinely ignored or given only fleeting attention? [Read more…]
SOR RAMS16-1 Bonus Discussion with Arda Akman
How to Create an ALT Plan
How to Create an ALT Plan
We cheat time. As reliability engineers, we are asked to peer into the future and predict the time to failure for our products and systems.
So, how do you go about setting up an accelerated life test? There are options that work, and some that do not.
Fault Tolerance Basics
Fault tolerance is a system that is reliant to the failure of elements within the system. It also may be called a fail safe design.
A fault tolerant system may continue to operate just fine, after one of the power supplies fails, for example. Or it may operate in a reduced or degraded state.
Other systems may have a ‘limp home’ condition, allowing the system to save critical data or allowing you to drive to a safe place to change a flat tire. [Read more…]
Do Your KPIs Adversely Impact Reliability?
Key Performance Indicators (KPIs) are measurable values related to essential business objectives.
A KPI provides a means to monitor the performance of a specific function.
In larger organizations, with sales & marketing, research & development, operations, supply chain and other teams working to bring products to market, each department has a specific role. [Read more…]
Reliability as Part of Every Decision
Concurrent engineering is a common approach that pairs the development of the product design and it’s supporting manufacturing processes through the development process.
Design engineers may require the creation of new manufacturing processes to achieve specific material properties, component performance, or mechanical, electrical or software tolerances. [Read more…]
Reliability in Product and Process Development
A product or system’s actual reliability performance is a function of the design, assembly, and use.
Decisions made during design predominately create the inherent reliability capability performance.
The selected components, manufacturing, transportation and installation all can add variability and errors to the product, often reducing the actual reliability performance.
The use conditions and maintenance add another layer of variability, again reducing reliability capability. [Read more…]
How to Attend a Reliability Conference
Next week is RAMS – the Reliability and Maintainability Symposium. A multitrack 3.5-day conference with classes, tutorials, paper sessions, a small trade show, plus many of you – peers, colleagues, and friends in the reliability world.
The conference is hosted by 9 professional societies and organized by a group of about 50 or so volunteers from those societies (I was an active member of the RAMS management committee for many years). [Read more…]
System Engineering and Reliability
System engineering is a superset of the other engineering fields (mechanical, civil, electrical, software, etc.) as the system engineers work to bring all the various elements of a system together into a final and cohesive whole. [Read more…]
Is there a right number of reliability engineers?
None, actually.
Or, one really good reliability engineering professional.
Or, an entire staff of highly talented reliability engineers.
The number of reliability engineers on staff really doesn’t matter. The outcome of your product and system reliability is not contingent on headcount or office space or list of degrees. [Read more…]
- « Previous Page
- 1
- …
- 23
- 24
- 25
- 26
- 27
- …
- 50
- Next Page »