Michael Pfeifer — Active Contributor

Any product is an assembly of components comprised of different materials. The reliability of the product depends on the reliability of the materials – their ability to withstand exposure to the use conditions without degrading to the point that the component or joint stops performing as needed.

There are two approaches for evaluating the reliability of materials: 1) product testing and 2) materials testing.  Both involve exposing test samples to actual or simulated use conditions and evaluating the response of the test samples as a function of the amount of exposure to the test conditions. For example, exposure to thermal cycling between -40 and +40 °C or exposure to salt spray. [Read more…]

In the previous article I discussed sources of stressors that can cause degradation of the materials in components and joints. In this article I’ll discuss the basics of metal corrosion – the electrochemical cell, seven common forms of corrosion, and examples of metals engineering and mechanical design approaches to control corrosion.

[Read more…]

In the previous articles I discussed the component design process, the considerations for designing components, and the importance of leveraging materials engineering to design components that meet performance and reliability requirements at low cost.

I will start focusing on reliability, discussing the considerations for identifying component and joint reliability requirements. I will refer only to components for ease of writing and reading, but the discussion also applies to metallurgical joints, i.e. weld, braze, and solder joints.

In this article, I will discuss identification of the conditions that can cause degradation of the materials that comprise components and joints. [Read more…]

In the previous article I discussed product design in general and the importance of leveraging materials engineering to design components that meet performance and reliability requirements at low cost. Both component form and materials can and should be engineered to optimize a component’s design.

In this article I discuss a component design process that explicitly includes materials engineering considerations. This process involves consideration of all design requirements and cost. Not just designing for reliability. That’s where selecting materials gets tricky – having to consider different sets of requirements and design for ease of component fabrication and joining.

[Read more…]

This article is the first in a series about material engineering and product reliability. The intent of the article is to provide you with a basic understanding of product reliability as viewed through the eyes of a material engineer. When I first talk to engineers who have a different background or focus, I start with the basics. As we speak more, I expand into relevant areas one at a time. That is what I hope to do with this series. Introduce you to some basics, and then move on to a deeper dive into the topic.

When considering product reliability, a materials engineer is concerned with how the materials in components respond when exposed to stressors that can cause the materials to degrade. Stressors include mechanical loads, corrosive environments, chemicals, heat and cold, electricity, and radiation. You may find additional stressors based on the environment components are used in, or how they are used. It’s a problem if a component or joint in a product degrades to the point where it stops functioning as required.

[Read more…]