11 – What is a Well Written Job Plan?

What is a Well Written Job Plan?

This show of the podcast is based on Job Plans.

These job plans are documents that contain a step by step action routine for daily maintenance issues that arise in an organization. It is a procedural process that defines the performance standards for execution of day to day work.

These plans are improved over time as the technicians face issues in the field and give feedback on their experiences to the planner.

This leads to a job plan which has some safest and efficient ways to implement jobs in the field creating a good Knowledge Management System which works as a library for job plans.
ᐅ Play Episode

by James Kovacevic Leave a Comment

10 – What Is Maintenance Planning & Scheduling?

What is Maintenance Planning & Scheduling?

This episode of the weekly podcast covers all the aspects of maintenance planning and scheduling.

Planning is one of the most time-consuming yet important activity if an organization needs anything done efficiently and effectively.

Any strategy or procedure needs planning and scheduling if it were to be implemented successfully.

A well-planned maintenance strategy not only ensures a good outcome but saves a lot of money and time.

Every industry uses this approach when delivering ahead of the deadlines can result in catastrophic results.

Now, this is one of the initial stages and any organization needs human and physical resources to accomplish these planned goals.

Planning definitely takes time but in the long run, you can manage to do more work in the given time which is the manifestation of the Parkinson’s Law.

It also helps in solving problems and avoid failures, because you can find out that what went wrong and how are you going to fix it as it is a step by step process.
ᐅ Play Episode

by James Kovacevic Leave a Comment

09 – The 4 Pitfalls of OEM Recommendations

The 4 Pitfalls of OEM Recommendations

This episode of the weekly podcast covers the 4 Pitfalls of OEM Recommendations.

The original equipment manufacturers provide a manual in which all the general instructions are provided in the form of an operating manual.

These can be helpful when someone is using the equipment for the first time but when the same apparatus has to be used in reputed organizations with a set-up of their own, this manual is not enough.

It is developed keeping in mind the general behavior of instruments and common environmental condition of workshops and laboratories.

Most of the times, manufacturers put together these recommendations considering the worst that can go wrong to cover their warranty policies.

That is why the organizations cannot rely only on this operating manual.
ᐅ Play Episode

by James Kovacevic 2 Comments

08 – Using Review RCM to Improve Plant Performance

Using Review RCM to Improve Plant Performance

Review RCM is a streamlined approach to improving plant performance.

It allows organizations to quickly address ineffective PM programs. How does it achieve this?

By using the operating environment, failure patterns, and P-F interval, we can answer three basic questions:

Will replacement of part on a known interval or usage reduce the probability of failure?
Can we see it in the process of failure with sufficient time to respond?
Is the impact of the failure high enough to warrant the cost of a PM strategy?

These three elements will help us to determine the type of PM strategy that is value-added.
ᐅ Play Episode

by James Kovacevic Leave a Comment

07 – FMEAs from an Expert’s Point of View with Fred Schenkelberg

FMEAs from an Expert’s Point of View with Fred Schenkelberg

You arrive in the office early Monday morning, and you receive an email from your boss. It is one that you have been dreaded for days.

You have been told that you are participating in a Failure Mode Effect Analysis for the next week.

Failure Mode Effect Analysis is often feared and avoided by many. Mainly because they are not well understood or people have been forced to sit through FMEAs that were not facilitated properly.
ᐅ Play Episode

by James Kovacevic 2 Comments

06 – What is a FMEA and How Can It Help?

What is an FMEA and How Can It Help?

Failure modes and effects analysis (FMEA) is a step-by-step approach for identifying all possible failures in a design, a manufacturing or assembly process.

“Failure modes” means the ways, or modes, in which something might fail.

Failures are any errors or defects, especially ones that affect the customer and can be potential or actual. They typically include the component, the damage or problem with it and the cause of it

“Effects analysis” refers to studying the consequences of those failures.
ᐅ Play Episode

by James Kovacevic Leave a Comment

05 – What is Reliability Centered Maintenance?

What is Reliability Centered Maintenance?

Does the age of equipment increase the probability of failure?

That was the conventional wisdom until Nowlan & Heap discovered that components have six different types of failure patterns:

Bathtub – 4%
Wear Out – 2%
Fatigue Related – 5%
Rapid Increase to Random – 7%
Random Level of Failure – 14%
Infant mortality – 68%

This means only 11% of failures are age related… 89% are not age related – so why do PM Programs still rely on time-based maintenance (Replacements, Overhauls) they only address 11% of failures.
ᐅ Play Episode

by James Kovacevic 5 Comments

04 – What is MTBF and Why You Shouldn’t Use It

What is MTBF and Why You Shouldn’t Use It

Mean Time Between Failure or MTBF is almost universally recognized in maintenance, reliability, and asset management.

Why is that? And does it actually help an organization improve the reliability of their assets?

The answer is a resounding No.
ᐅ Play Episode

by James Kovacevic Leave a Comment

03 – Understanding the Various Maintenance Strategies

Understanding the Various Maintenance Strategies

There are 3 primary types of maintenance strategies utilized:

Condition Based Maintenance (CBM)
Time-Based Maintenance (TBM)
Run to Fail (RTF)

The strategy utilized depends on heavily upon the nature of the failure.

Meaning does it wear out with age or is a random failure independent of time? Condition based maintenance is acceptable for the random failures, while Time based maintenance works for wearing out type failures.

Lastly, Run to Failure is acceptable when there are no significant consequences in the event of a failure.
ᐅ Play Episode

by James Kovacevic Leave a Comment

02 – Using Criticality to Determine Your Maintenance Strategy

Using Criticality to Determine Your Maintenance Strategy

There are many different methodologies used to determine what maintenance should be done.

Once you include the variants, the number of methodologies can become overwhelming. By the end of the podcast, you should have an overview of each methodology and when to use them.
ᐅ Play Episode

by James Kovacevic Leave a Comment

00 Welcome to the Rooted In Reliability Podcast

Welcome to the Rooted In Reliability Podcast: Your Plant Performance Podcast

This podcast is for the maintenance professional who has limited time to research the information they need.

The Rooted In Reliability Podcast is designed to do the research for you, and you can learn as you commute to work.
ᐅ Play Episode