A U-tube manometer is the simplest of the pressure measurement devices. Its name comes from the U-shape formed when the two ends of a flexible tube full of liquid are raised to keep the liquid from coming out the ends. A U-tube manometer is a ‘liquid’ balance.
A spring balance used in the kitchen weighs a load by matching the force produced by the weight of the load with the force produced from the tension of the balance spring. The change in length of the spring is a measure of the load’s weight and is shown on a graduated scale by a pointer attached to the spring. Similarly, a U- tube manometer is used to balance the weight of the liquid in one leg of the ‘U’ against the pressure introduced into the other leg. The difference in height between the two legs of liquid represents the pressure pushing the liquid down one leg and up the other. The height difference is measured on a graduated scale.
Pressure in a Column of Liquid or Gas
Invention of the U-tube manometer allowed the early investigators into fluid mechanics to confirm that pressure was directly related to the sum total of the forces acting on a surface. If you were to stand on the seashore, the pressure on you would be the weight of the air column directly above you. That pressure has been given the name of ‘one atmosphere’. If you were to dive to a depth of 10 meters (about 32 feet) there would now be an added pressure on you of the weight of water above plus the weight of the air column.
By international agreement (a convention) ‘absolute’ pressure includes the pressure of the column of air whereas ‘gauge’ pressure does not. Gauge pressure is the pressure showing on a pressure indicator dial and is one atmosphere less than absolute pressure.
The pressure of 1-m depth of water is found from the formula –
Pressure = Density x Gravity x Height of liquid column P=ρgh
The unit is a Pascal. Gravity has the value of 9.8 m/sec2 at sea level. For simplicity of multiplication the value 10 m/sec2 will be used. The density for water is 1,000 kg per cubic meter at 20 oC.
Putting all the know values back into the pressure equation gives –
P=ρgh=1000kg/m3 x10m/sec2 x1m = 10,000 Pa = 10 kPa
The calculation shows that 1-meter of water is equal to about 10 kPa, which means 30 meters of water produces a pressure of nearly 300 kPa. One atmosphere of air pressure at sea level is 101 kPa. This means the pressure at 30 meters depth below sea level is 300 kPa gauge pressure or about 400 kPa absolute pressure. The same formula can be used to calculate negative, or vacuum, pressures.
How to Use a U-tube Manometer
Figure No. 1 shows three manometers open to atmosphere. The left one has the same pressure in both legs and the liquid levels are the same on both sides. The U-tube in the center shows a pressure applied to the left leg of 100 kPa. The water level in the left leg has gone down and the level in the right leg has gone up. The difference in the height of water between the two legs is 10 meters. Since the liquid is water, each meter height represents 10 kPa and a 10 meter high water column represents 100 kPa gauge pressure. The remaining U-tube shows a pressure of 100 kPa as well but this time mercury is used in the tube. The height of mercury is now 750mm. The density of mercury is 13.6 times that of water. Because mercury is so much heavier than water the same pressure raises a correspondingly lower column of liquid.
If a manometer were used to measure a vacuum the column of liquid would be drawn up toward the vacuum and the difference in the height of liquid between the two legs would be a measure of the vacuum pressure below atmospheric pressure.
Making a U-tube Manometer
To make a U-tube manometer requires a clear plastic tube mounted in the shape of a ‘U’ onto a board marked with a graduated scale. The pressure to be measured determines the selection of the liquid used in the tube. The U-tube liquid’s density and the pressure being measured determine the height of the liquid column and the corresponding height of the backing-board.
Mike Sondalini – Maintenance Engineer.
We (Accendo Reliability) published this article with the kind permission of Feed Forward Publishing, a subsidiary of BIN95.com
Web: trade-school.education
E-mail: info@trade-school.education
If you found this interesting you may like the ebook Centrifugal Pump Problems & Answers
How to measure pressure on surface using Manometer?
A manometer measures the pressure from the force caused by the fluid (air, gases, water, liquids, etc.) pushing against its sensing surface. The manometer sensing surface needs to be connected to the fluid being measured.
It cannot be used to measure the pressure on the surface of the earth, as it stands, but read on. Because air pressure is what a U-tube uses to measure a DIFFERENTIAL between one atmosphere, at the open end, and another atmosphere, attached usually via a tube at the other opening. If you had a device that could apply a known pressure to the open end, say a syringe and bung, which you have previously calculated the volume of air expressed from it to a known pressure/volume at a given temp, then it can measure atmospheric pressure directly.
Larry
Whey the change of measure of weight u tube mona Metter
A manometer measures pressure by showing the amount of movement of the force sensing surface caused by the pressure of the fluid being monitored. As the pressure changes the sensing surface moves in sympathy.
The differential height of mercury in a U-tube mercury manometer measuring atmospheric air represents the pressure caused by the air contacting the sensing surface. When air pressure rises the difference in the height of mercury increases because there is greater force to push the column of mercury higher. When the air pressure drops there is less force on the sensing surface and the height difference decreases.
Wjay [what] are the uses of a u-tube manometer