Accendo Reliability

Your Reliability Engineering Professional Development Site

  • Home
  • About
    • Contributors
  • Reliability.fm
    • Speaking Of Reliability
    • Rooted in Reliability: The Plant Performance Podcast
    • Quality during Design
    • Way of the Quality Warrior
    • Critical Talks
    • Dare to Know
    • Maintenance Disrupted
    • Metal Conversations
    • The Leadership Connection
    • Practical Reliability Podcast
    • Reliability Matters
    • Reliability it Matters
    • Maintenance Mavericks Podcast
    • Women in Maintenance
    • Accendo Reliability Webinar Series
  • Articles
    • CRE Preparation Notes
    • on Leadership & Career
      • Advanced Engineering Culture
      • Engineering Leadership
      • Managing in the 2000s
      • Product Development and Process Improvement
    • on Maintenance Reliability
      • Aasan Asset Management
      • AI & Predictive Maintenance
      • Asset Management in the Mining Industry
      • CMMS and Reliability
      • Conscious Asset
      • EAM & CMMS
      • Everyday RCM
      • History of Maintenance Management
      • Life Cycle Asset Management
      • Maintenance and Reliability
      • Maintenance Management
      • Plant Maintenance
      • Process Plant Reliability Engineering
      • ReliabilityXperience
      • RCM Blitz®
      • Rob’s Reliability Project
      • The Intelligent Transformer Blog
      • The People Side of Maintenance
      • The Reliability Mindset
    • on Product Reliability
      • Accelerated Reliability
      • Achieving the Benefits of Reliability
      • Apex Ridge
      • Metals Engineering and Product Reliability
      • Musings on Reliability and Maintenance Topics
      • Product Validation
      • Reliability Engineering Insights
      • Reliability in Emerging Technology
    • on Risk & Safety
      • CERM® Risk Insights
      • Equipment Risk and Reliability in Downhole Applications
      • Operational Risk Process Safety
    • on Systems Thinking
      • Communicating with FINESSE
      • The RCA
    • on Tools & Techniques
      • Big Data & Analytics
      • Experimental Design for NPD
      • Innovative Thinking in Reliability and Durability
      • Inside and Beyond HALT
      • Inside FMEA
      • Integral Concepts
      • Learning from Failures
      • Progress in Field Reliability?
      • R for Engineering
      • Reliability Engineering Using Python
      • Reliability Reflections
      • Testing 1 2 3
      • The Manufacturing Academy
  • eBooks
  • Resources
    • Accendo Authors
    • FMEA Resources
    • Feed Forward Publications
    • Openings
    • Books
    • Webinars
    • Journals
    • Higher Education
    • Podcasts
  • Courses
    • 14 Ways to Acquire Reliability Engineering Knowledge
    • Reliability Analysis Methods online course
    • Measurement System Assessment
    • SPC-Process Capability Course
    • Design of Experiments
    • Foundations of RCM online course
    • Quality during Design Journey
    • Reliability Engineering Statistics
    • Quality Engineering Statistics
    • An Introduction to Reliability Engineering
    • Reliability Engineering for Heavy Industry
    • An Introduction to Quality Engineering
    • Process Capability Analysis course
    • Root Cause Analysis and the 8D Corrective Action Process course
    • Return on Investment online course
    • CRE Preparation Online Course
    • Quondam Courses
  • Webinars
    • Upcoming Live Events
  • Calendar
    • Call for Papers Listing
    • Upcoming Webinars
    • Webinar Calendar
  • Login
    • Member Home

by Robert Allen Leave a Comment

What is Design for Assembly?

What is Design for Assembly?

In previous articles we covered design for six sigma and design for lean.  Now let’s take a look at Design for Assembly.  We’ll do this by following the Design for Six Sigma (DFSS) thought process, and add design for assembly (DFA) subtopics as follows:

Recall the objective of DFSS/DFA is to model and improve design performance before manufacturing the part, even before creating a prototype.  DFA therefore requires assembly performance to be assessed and modeled in a way that can determine (while still in the design phase), assembly performance enhancements.

We’ll use a typical master cylinder assembly as an example.  Note the exploded parts diagram helps to ‘make the process’ (or product) visible. Of course, 3D CAD systems are applicable here (as well as 3D printers, which could enable a physical trial of an assembly sub-process to be performed).  We’ll also identify the base component and part assembly sequence:

In this example, the base component (master cylinder housing) is placed in fixtures and parts are vertically installed.  The base component re-oriented and placed into different fixtures several times throughout the assembly process.

Like any process map, the objective is to make the process visible.  Also note the map can be used to estimate total assembly time/cost and to form a basis for a design for assembly P-FMEA (using a traditional P-Map).

With an exploded parts diagram, cross-sections and the assembly sequence, a list of design-for-assembly criteria can be applied, some of which is provided as follows:

  • Assemble on a suitable base
    • During assembly, is the base component oriented horizontally and lying ‘flat’?
    • Can special fixtures to assist in assembly be eliminated?
    • Are parts stacked vertically when installed into the base component?
  • Layered assembly
    • Does the design provide for easy insertion?
    • Does the design provide for disassembly (including maintainability & service environments)?
  • Mistake-proof and reduce assembly risk
    • Can a part be improperly installed (upside-down or backwards)?
    • Can a part be partially installed?
  • Simplify and reduce the number of fasteners
    • Eliminate screws, bolts, clips, rivets were possible
    • Use snaps, interlocks, slots and press fits were possible
    • Enable automatic tools to be used
  • Limit flexible parts
    • Eliminate wires, cables and belts were possible (or plug components together were possible)
  • Modular and multi-functional parts
    • Is the design of a component suitable for multiple applications?
    • Can a component be designed for perform multiple function?
  • Limit the number of parts
    • Is there a reason for dissimilar materials to be used for mating components? If not, can they be combined into a single component?
  • Design parts for feeding and insertion
    • Is tangling of components minimized?
    • Can automated equipment pick and place the part?

Of course, cross-functional team members can contribute to the criteria, the answers to the questions and the design thinking necessary to improve design for assembly.  Cost models should show reduced cost with the improved assembly process.  Also, when prototype parts are available we can validate our cost model and ensure the appropriate controls are in place which ensure robust assembly.

Finally, recall our overall DFSS/DFA objective to maximize customer value and minimize cost.  Therefore, design and assembly process optimization should also ensure customer critical-to-quality characteristics aren’t compromised.

Filed Under: Articles, on Leadership & Career, Product Development and Process Improvement Tagged With: agile product development, Critical to Quality, customer value, Design for Assembly, Design for Six Sigma, New Product Development, PLC process, product development, product life cycle, Project Management, six sigma

About Robert Allen

Robert Allen has over 25 years of professional experience in the areas of product development, process improvement and project management. Rob was a key contributor to numerous deployments of lean sigma and project management organizations, most notably with Honeywell and TE Connectivity. Included in Rob’s experience are multiple certifications and over 25 years of practice in the development, teaching, execution, and leadership of product lifecycle, lean product development, DFSS, lean six sigma, project management, systems engineering and supply chain.

« TIG review
6 Secrets of Trouble-free Lubrication Success »

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Articles by Rob Allen
in the Product Development and Process Improvement series

Join Accendo

Receive information and updates about articles and many other resources offered by Accendo Reliability by becoming a member.

It’s free and only takes a minute.

Join Today

Join PD&PI

Your email is safe and the opt-in here provides your permission to send messages concerning the PD&PI article list plus special announcements. Privacy Policy

Recent Posts

  • test
  • test
  • test
  • Your Most Important Business Equation
  • Your Suppliers Can Be a Risk to Your Project

© 2025 FMS Reliability · Privacy Policy · Terms of Service · Cookies Policy